Syringe Sizes

Syringes have been around for decades and are widely used in medicine. If you have ever visited a hospital for a regular checkup or because of some medical treatment, you probably have seen a syringe, if not injected by it. Some of us might have even feared going to the doctor because of them.

Their primary purpose is straightforward: injecting a liquid in places that are difficult to access. Syringes have been used on humans and animals, but their usage is not limited to them.

Bạn đang xem: Syringe Sizes

Syringe sizes

Syringes come in various types depending on the purpose that they are being used for. Their different types are defined according to their capacity, syringe tips, needle sizes, and needle gauges. In this article, we will discuss only the syringe types based on the different barrel sizes.

Types of syringes based on barrel sizes

Figuring out the syringe size is very important for injecting the dosage of medicine in the patient. When choosing the syringe, it is required to make sure that the syringe’s size is according to the volume of the drugs. For a larger volume dosage of medicines, you must choose the larger capacity syringes accordingly. Another essential factor that should be kept in mind when choosing the right syringe is the desired pressure flow. Larger capacity syringes have lower pressure flow and vice versa.

Syringe sizes are specified based on the amount of liquid that they can hold. The syringe size or capacity can be measured in two ways: milliliters (mL) and cubic centimeters (cc). The milliliter measurement is used for the liquid volume, whereas cubic centimeters measurement is used for the volume of solids. CC and ml are the same thing. One milliliter is exactly the same volume as one cubic centimeter. The choice between the two names depends on the situation. Hospitals often prefer milliliters because they can easily convert them to weight measurements for liquids.

The syringe barrel has markings on it according to the milliliter (mL) scale to let the user know the exact dosage of the medication that is being injected. Another vital thing to consider while reading from the syringe is precisely measuring the plunger’s top ring.

Most commonly used syringe sizes and their uses

The different syringes are based on their capacity in milliliter (mL) or cubic centimeter (cc). The volume of the syringe should be enough to fulfill the medication that is to be injected. The syringe sizes can range from 0.25mL to 450mL. The size of the syringe is also used to determine the needle size and needle gauge. Below we will discuss some of the most commonly used syringe sizes.

1 mL or less than 1 mL syringes

one milliliter (1 ml) is equal to one cubic centimeter (1 cc). 1mL syringes are commonly used for diabetic and tuberculin medication, as well as intradermal injections. The tuberculin syringes have greater than half inches of needle length and have needle gauge between 26G and 27G. We can use 1 mL syringes with needle gauge size between 25G and 26G as an intradermal injection.

Xem thêm : The Bristal at White Plains

The insulin syringes have mostly three different sizes because they are injected in a lower dose than other medications. If you have to inject the insulin dose of 30 units or lesser than 30 units, you have to use a 0.3 mL syringe. Similarly, if you have to inject a dose between 31 to 50 units, you have to use a 0.5 mL syringe, and if the recommended dosage is between 51 to 100 units, you have to use the 1mL syringe. Their needles are not greater than half inches and have needle gauge between 29G and 31G.

2 mL – 3 mL syringes

The syringes between 2 and 3 mL are mostly used for vaccine injections. The syringe size must be determined according to the vaccine dose. The needle gauge for vaccine injections is mostly between 23G and 25G, and the needle length can vary according to the patient’s age and other factors. Choosing the right length needle is very important in terms of avoiding any risk of injection site reactions.

5 mL syringes

The syringes with a capacity of 5 mL can measure doses of liquid medication up to 5 ccs. These syringes are used for intramuscular injections or only the injections that are given directly into the muscles. Intramuscular injections should be given at an angle of 90 degrees, and the gauge size of the needle should be between 22G and 23G.

10 mL syringes

The 10 mL syringes are used for large volume intramuscular injections, which require higher doses of medication to be injected. The needle length for intramuscular injections should be between 1 and 1.5 inches for adults, and the needle gauge should be between 22G and 23G.

20 mL syringes

The 20 mL syringes have a larger capacity, which makes them ideal for mixing different medicines. For instance, taking multiple drugs and fusing them in a syringe and then injecting them in an infusion set before finally injecting it into the patient.

50 – 60 mL syringes

The larger 50 – 60 mL syringes are commonly used with scalp vein set for intravenous injections. We can choose a wide range of scalp vein sets (from 18G to 27G) according to the diameter of the vein and the viscosity of the aqueous solution.

Syringe parts

A syringe, a quintessential instrument in medical practice, consists of three fundamental parts: a barrel, a plunger, and a needle. All thesesyringe parts are meticulously crafted from medical-grade materials, ensuring the utmost safety and precision in medical procedures. The plunger, a crucial element, serves as the mechanism to control the dosage of liquid to be administered through either the needle or a connected tube. Meanwhile, the barrel, predominantly composed of polypropylene, bears distinct markings denoting various measurements, providing healthcare professionals with accurate dosage control. Although some syringes deviate from the common plastic composition, opting for materials such as glass or metal, these variants are less prevalent in clinical settings. The adaptability and widespread use of plastic syringes underscore their dominance in medical applications.

Company Introduction

Liaoning KANGYI Medical Equipment Co., Ltd was founded in 1994 and is one of the leading manufacturers of IV sets, syringes, and medical parts such as the winged drip chamber, roller clamp and Y injection site in China. Quality is our highest priority, and our quality assurance system is certified and meets the standards of the Chinese National Medical Products Administration, ISO 13485, and the European Union’s CE mark.

Xem thêm : Can Bearded Dragons Eat Zucchini?

We produce over 600 million pieces per year. Our products are sold across China and exported worldwide, to destinations including Europe, South America, Russia, Africa, and the Middle East.

Our company employs over 300 staff, including 50 people working in engineering and technical management. Our premises occupy an area of 20,000 square meters, with a construction area of 15,000 square meters. This space includes a 100,000-class purification workshop that occupies 8,000 square meters.

If you want to know more about us and talk face to face, we welcome you to visit our booth in CMEF Shanghai and Hospitalar in Brazil.

Related Articles

Tag: types of syringes Tag: 1ml syringe Tag: insulin syringe Tag: syringe plunger Tag: syringe measurements Tag: 5ml syringe Tag: 100 unit insulin syringe needle size Tag: needle gauges Tag: syringe types Tag: syringe size Tag: disposable syringe Tag: 10 ml syringe Tag: plastic syringe Tag: parts of a syringe Tag: injection syringe Tag: types of syringes and uses Tag: insulin syringe sizes Tag: syringe sizes Tag: ukuran jarum suntik Tag: insulin syringes Tag: plastic syringes Tag: plunger syringe Tag: 3ml syringe Tag: straight needle

Types Of Syringe

Handle and Care of Syringes, Needles& IV Tubing

Management Of Medical Consumables

Parts of syringe and needle | 2 part syringe

Tuberculin syringe vs insulin syringe

Nguồn: https://blogtinhoc.edu.vn
Danh mục: Info